Collection
Auto connectors by pin count, crimp terminals, wiring harnesses, fast connectors, connector accessories, tools and connector kits for automotive, agricultural and industrial equipment. Send an inquiry for specifications, samples and pricing.
A gel-filled IDC inline splice with a green cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 24-19 AWG solid copper wire, with a smaller 2.30 mm max insulation OD.
A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.
An XT60-style high-current connector, male end: a yellow moulded housing with an open rectangular shroud holding two gold open-cylinder contacts, and a "+" polarity mark on the side. The housing is moulded "XT60" as a type mark. Sold as the male half; it mates with the XT60-F female end.
A gel-filled IDC butt splice with an orange cap and clear body: two solid copper wires join end to end — the two wires may be different gauges — and the contacts pierce the insulation when pressed. Gel-sealed against moisture. For 19-26 AWG solid copper wire.
A gel-filled IDC inline splice with a red cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 24-19 AWG solid copper wire.
A black T-plug connector pair (one male, one female) for RC battery and speed-controller power connections: two flat blades in a T layout that cannot be plugged in reversed, with "+" and "-" polarity marks moulded on the female housing. Smooth black housing.
An XT60-style high-current connector, female end: a yellow moulded housing with two cylindrical barrels, gold contacts visible inside, and solder cups at the rear. The housing is moulded "XT60-F" as a type mark. Sold as the female half; it mates with the XT60-M male end.
A gel-filled IDC inline splice with a blue cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 19-16 AWG solid copper wire.
A red anti-skid T-plug connector pair (one male, one female) for RC battery and speed-controller power connections: two flat blades in a T layout that cannot be plugged in reversed, with anti-slip ribs on the sides for grip. The housing is moulded "XT".
A gel-filled IDC butt splice with a yellow cap and clear body: two solid copper wires join end to end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 22-26 AWG solid copper wire.
A black double T-tap quick-splice connector: the main wire runs straight through both D ends without being cut, and a branch wire joins from the G end — no stripping, the gold IDC fork contacts pierce the insulation and the clip cover locks closed. For low-voltage wiring. Rated current 10 A; voltage is not stated (see notes).
A gel-filled IDC inline splice with a green cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 16-19 AWG solid copper wire. The main photo shows a group of nine units.
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.
DT or DTM? Compare DEUTSCH DT and DTM connectors by contact size, current rating, wire gauge, and IP67/IP69K sealing to choose the right sealed connector.
