ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

Specifications

Connector type
Press-type spring-clamp wire connector, white housing
Series
CH1 (1-pin), CH2 (2-pin), CH3 (3-pin)
Contact
Copper
Rated current
10 A
Wire range
0.5-2.5 mm² (22-14 AWG)
Use
LED strip and lighting harness wiring
A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.
Who Is This Product For? • LED strip and lighting installers • Harness builders needing tool-free wire joints • Anyone joining 0.5-2.5 mm² wire with a press connector
Key Selling Points • Press-type spring clamp, tool-free • CH1 (1-pin), CH2 (2-pin), CH3 (3-pin) • White housing • 10 A • 0.5-2.5 mm² / 22-14 AWG • Copper contacts
Typical Applications • LED strip wiring • Lighting harness joints • Tool-free wire connections
Basic Specifications • Connector type: Press-type spring-clamp wire connector, white housing • Series: CH1 (1-pin), CH2 (2-pin), CH3 (3-pin) • Contact: Copper • Rated current: 10 A • Wire range: 0.5-2.5 mm² (22-14 AWG) • Use: LED strip and lighting harness wiring

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

952-main
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

View product
951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
xt60-m-main
Without Gel

XT60-M XT60-Style High-Current Connector, Male

An XT60-style high-current connector, male end: a yellow moulded housing with an open rectangular shroud holding two gold open-cylinder contacts, and a "+" polarity mark on the side. The housing is moulded "XT60" as a type mark. Sold as the male half; it mates with the XT60-F female end.

View product