With Gel
U1R Gel-Filled IDC Inline Splice Connector, Red Cap, 24-19 AWG
A gel-filled IDC inline splice with a red cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 24-19 AWG solid copper wire.
Specifications
- Connector type
- Gel-filled IDC inline splice, 4-wire (1 full pair), 2 connections
- Wire range
- 24-19 AWG solid copper, 0.5-0.9 mm conductor
- Max insulation OD
- 3.18 mm (0.125 in)
- Housing
- Polycarbonate
- Colour
- Red cap, clear body
- Filling
- Gel
A gel-filled IDC inline splice with a red cap and clear body: four wires (one full pair) enter two per end, and the contacts pierce the insulation when pressed — no stripping, gel-sealed against moisture. For 24-19 AWG solid copper wire.
Who Is This Product For?
• Telecom and data cable installers
• Building wiring installers splicing fine wire pairs
• Anyone inline-splicing 24-19 AWG solid copper wire
Key Selling Points
• Gel-filled IDC inline splice, 4-wire (1 full pair)
• Red cap, clear body
• 24-19 AWG solid copper (0.5-0.9 mm)
• Max insulation OD 3.18 mm
• Polycarbonate housing
• No stripping needed
• Gel moisture seal
Typical Applications
• Voice and data cabling
• Building wiring
• Inline wire-pair splicing
Basic Specifications
Connector type: Gel-filled IDC inline splice, 4-wire (1 full pair), 2 connections
Wire range: 24-19 AWG solid copper, 0.5-0.9 mm conductor
Max insulation OD: 3.18 mm (0.125 in)
Housing: Polycarbonate
Colour: Red cap, clear body
Filling: Gel
