t2-main
t2-secondary
Without Gel

T2 Quick-Splice Wire Connector, Double T-Tap, 10 A

A black double T-tap quick-splice connector: the main wire runs straight through both D ends without being cut, and a branch wire joins from the G end — no stripping, the gold IDC fork contacts pierce the insulation and the clip cover locks closed. For low-voltage wiring. Rated current 10 A; voltage is not stated (see notes).

Specifications

Connector type
Double T-tap quick splice, 2-pin 3-way (two D main + one G branch)
Housing
PC, black base, transparent cover
Contact
Gold IDC fork contacts, two sets (appearance)
Rated current
10 A
Wire range, main (D)
22-18 AWG (0.34-0.75 mm²)
Wire range, branch (G)
22-20 AWG (0.34-0.50 mm²)
Max cable OD
1.5-2.1 mm
Waterproof
No
A black double T-tap quick-splice connector: the main wire runs straight through both D ends without being cut, and a branch wire joins from the G end — no stripping, the gold IDC fork contacts pierce the insulation and the clip cover locks closed. For low-voltage wiring. Rated current 10 A; voltage is not stated (see notes).
Who Is This Product For? • LED strip installers • Automotive lighting modifiers • Anyone tapping a branch wire off a main wire without stripping
Key Selling Points • Double T-tap, 2-pin 3-way • Black base, transparent cover • Gold IDC fork contacts, two sets • 10 A • Main (D) 22-18 AWG, branch (G) 22-20 AWG • PC housing • Not waterproof
Typical Applications • LED strip wiring • Automotive lighting wiring • Tapping a branch off a main wire
Basic Specifications Connector type: Double T-tap quick splice, 2-pin 3-way (two D main + one G branch) Housing: PC, black base, transparent cover Contact: Gold IDC fork contacts, two sets (appearance) Rated current: 10 A Wire range, main (D): 22-18 AWG (0.34-0.75 mm²) Wire range, branch (G): 22-20 AWG (0.34-0.50 mm²) Max cable OD: 1.5-2.1 mm Waterproof: No

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

952-main
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

View product
951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

View product