xt60-f-main
xt60-f-secondary
Without Gel

XT60-F XT60-Style High-Current Connector, Female

An XT60-style high-current connector, female end: a yellow moulded housing with two cylindrical barrels, gold contacts visible inside, and solder cups at the rear. The housing is moulded "XT60-F" as a type mark. Sold as the female half; it mates with the XT60-M male end.

Specifications

Connector type
XT60-style high-current connector, female
Poles
2
Colour
Yellow housing
Contact
Gold contacts, solder-cup rear
Moulded marking
"XT60-F" / "XT60" (type mark)
An XT60-style high-current connector, female end: a yellow moulded housing with two cylindrical barrels, gold contacts visible inside, and solder cups at the rear. The housing is moulded "XT60-F" as a type mark. Sold as the female half; it mates with the XT60-M male end.
Who Is This Product For? • RC hobbyists connecting batteries and speed controllers • RC builders needing a high-current female connector • Anyone replacing an XT60-style female connector
Key Selling Points • XT60-style high-current connector, female • Yellow housing • Two cylindrical barrels with gold contacts • Solder-cup rear • Moulded "XT60-F" type mark • Mates with XT60-M
Typical Applications • RC battery power connections • RC speed-controller wiring • High-current RC power leads
Basic Specifications Connector type: XT60-style high-current connector, female Poles: 2 Colour: Yellow housing Contact: Gold contacts, solder-cup rear Moulded marking: "XT60-F" / "XT60" (type mark)

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

952-main
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

View product
951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

View product