Collection
Auto connectors by pin count, crimp terminals, wiring harnesses, fast connectors, connector accessories, tools and connector kits for automotive, agricultural and industrial equipment. Send an inquiry for specifications, samples and pricing.
DEUTSCH DT series 2-position plug housing for size 16 socket contacts, in a black housing with enhanced seal retention (no end cap). Free-hanging in-line plug; mates with the DT04-2P receptacle.
DEUTSCH DT series 2-position PCB header, flanged, right-angle (90 degrees). Moulded pin contacts, through-hole solder to the PCB, panel mount with mounting screws. Fully shrouded rectangular header with a locking mating interface.
DEUTSCH DT series 2-position PCB header, flangeless, straight (vertical). Moulded pin contacts, through-hole solder to the PCB, panel mount with mounting screws. Fully shrouded rectangular header with a locking mating interface; the flangeless, vertical counterpart of the DT13-2P.
DEUTSCH DTM series 2-position receptacle housing for size 20 pin contacts, grey, with an end cap on the rear covering the wire-entry face. Free-hanging in-line receptacle; mates with the DTM06-2S plug.
DEUTSCH DTM series 2-position receptacle housing for size 20 pin contacts, grey, with a shrink-boot adapter on the rear for fitting a heat-shrink boot over the cable entry. Free-hanging in-line receptacle; mates with the DTM06-2S plug.
DEUTSCH DTM series 2-position receptacle housing for size 20 pin contacts, grey, with a built-in terminating resistor for a J1939 (CAN) bus — it terminates the bus at the end of the network instead of carrying wires through. Gold pins; the P006 marking is printed on the end cap. Free-hanging in-line receptacle; mates with the DTM06-2S plug.
DEUTSCH DTM series 2-position plug housing for size 20 socket contacts, grey, with an end cap on the rear covering the wire-entry face. Free-hanging in-line plug; mates with the DTM04-2P receptacle.
DEUTSCH DTM series 2-position plug housing for size 20 socket contacts, grey, with a shrink-boot adapter on the rear for fitting a heat-shrink boot over the cable entry. Free-hanging in-line plug; mates with the DTM04-2P receptacle.
DEUTSCH DTM series 2-position plug housing for size 20 socket contacts, grey, with a built-in terminating resistor for a J1939 (CAN) bus — it terminates the bus at the end of the network instead of carrying wires through. Gold sockets; the P006 marking is moulded on the end cap. Free-hanging in-line plug; mates with the DTM04-2P receptacle.
DEUTSCH DTP series 2-position receptacle housing for size 12 pin contacts. The power version of the DT 2-way receptacle (25 A vs 13 A). Free-hanging in-line receptacle; mates with the DTP06-2S plug.
DEUTSCH DTP series 2-position plug housing for size 12 socket contacts. The power version of the DT 2-way plug (25 A vs 13 A). Grey, sealable, free-hanging plug; mates with the DTP04-2P receptacle.
Ceramic headlamp bulb holder / socket for H11 bulbs (also listed for H8/H9, which share the same base). Two-pin socket with a white ceramic insert in a black plastic bracket/housing, silicone seal, and pre-wired pigtail leads. The ceramic body resists the heat of halogen headlamp bulbs where a plain plastic socket would melt. Sold in pairs with pre-wired leads.
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.
DT or DTM? Compare DEUTSCH DT and DTM connectors by contact size, current rating, wire gauge, and IP67/IP69K sealing to choose the right sealed connector.
