2Pin
DEUTSCH DTM DTM04-2P-P006 2-Way Sealed Connector Receptacle with Terminating Resistor
DEUTSCH DTM series 2-position receptacle housing for size 20 pin contacts, grey, with a built-in terminating resistor for a J1939 (CAN) bus — it terminates the bus at the end of the network instead of carrying wires through. Gold pins; the P006 marking is printed on the end cap. Free-hanging in-line receptacle; mates with the DTM06-2S plug.
DEUTSCH DTM series 2-position receptacle housing for size 20 pin contacts, grey, with a built-in terminating resistor for a J1939 (CAN) bus — it terminates the bus at the end of the network instead of carrying wires through. Gold pins; the P006 marking is printed on the end cap. Free-hanging in-line receptacle; mates with the DTM06-2S plug.
Who Is This Product For?
CAN bus / J1939 network builders needing a terminating receptacle at the end of the bus
Automotive electronics harness builders
Buyers sourcing the DTM04-2P-P006 variant
Key Selling Points
2-position receptacle housing for size 20 pin contacts
7.5 A max, 250 V, -55 to +125 °C
Built-in terminating resistor for J1939 bus, gold pins
IP67 sealed, PA66/PA-GF housing with silicone seals
Typical Applications
J1939 (CAN) bus termination
Automotive electronics harnesses
Sealed 2-circuit signal connections
Basic Specifications
Positions: 2
Series: DEUTSCH DTM
Gender: Receptacle (housing for male pin contacts)
Contact size: 20
Current rating (max): 7.5 A
Voltage rating (max): 250 VDC / 250 VAC
Wire range: 22-20 AWG
Operating temperature: -55 to +125 °C
Housing material: PA66/PA-GF
Colour: Gray
Contacts: Gold pins
Function: Terminating resistor, J1939
Sealing: IP67
Pitch: 3.81 mm
Terminal position assurance (TPA): Yes
Flammability: UL 94V-0
Mating part: DTM06-2S
