2Pin
DEUTSCH DT DT13-2P 2-Way PCB Header, Flanged Right-Angle
DEUTSCH DT series 2-position PCB header, flanged, right-angle (90 degrees). Moulded pin contacts, through-hole solder to the PCB, panel mount with mounting screws. Fully shrouded rectangular header with a locking mating interface.
DEUTSCH DT series 2-position PCB header, flanged, right-angle (90 degrees). Moulded pin contacts, through-hole solder to the PCB, panel mount with mounting screws. Fully shrouded rectangular header with a locking mating interface.
Who Is This Product For?
PCB and harness builders needing a flanged right-angle 2-position DT header
Panel-mount board connections in automotive electronics
Buyers sourcing the DT13-2P header
Key Selling Points
2-position flanged right-angle PCB header
13 A max, 250 V, -55 to +125 °C
Moulded pin contacts, nickel plating, through-hole solder
Panel mount with mounting screws
Typical Applications
Automotive electronics
PCB-to-harness connections
Panel-mounted board connections
Basic Specifications
Positions: 2
Series: DEUTSCH DT
Header type: Flanged right-angle PCB header, fully shrouded, rectangular
Contact type: Pin, moulded, nickel plating
Contact size: 16
Current rating (max): 13 A
Voltage rating (max): 250 VDC / 250 VAC
Nominal voltage architecture: 12 / 24 V
Operating temperature: -55 to +125 °C
Colour: Gray
PCB mount orientation: Right angle (90 degrees)
Termination to PCB: Through hole - solder
Recommended PCB thickness: 0.78-2.36 mm
Mounting: Panel mount, mounting screw, mounting holes
Pitch: 5.46 mm
Mating pin diameter: 1.59 mm
Dimensions: Length 36.07 mm, Width 35.31 mm, Profile height from PCB 27.43 mm
Sealing: Sealable (IP rating not tested)
Flammability: UL 94V-0
Mating retention: Locking interface
Mating interface: DT04-2P
