
DJ7036A-2.8-21 3-Pin Sealed Automotive Connector 2.8 mm
3-pin 2.8 mm sealed automotive connector, white housings (mating pair) in the filed photo. Listed as a car waterproof connector under part number 12040977.
Collection
Auto connectors by pin count, crimp terminals, wiring harnesses, fast connectors, connector accessories, tools and connector kits for automotive, agricultural and industrial equipment. Send an inquiry for specifications, samples and pricing.

3-pin 2.8 mm sealed automotive connector, white housings (mating pair) in the filed photo. Listed as a car waterproof connector under part number 12040977.

3-pin 1.5 mm sealed automotive sensor connector, black housing with a purple (magenta) seal and grey terminal insert, sold as a wired pigtail. Listed as the plug for 12059595 pressure-sensor connectors.

3-pin 2.2 mm sealed automotive connector, black housing with a white insert, sold as a set with 3 metal terminals and 3 red wire seals. Listed as a MAP / VSS (vehicle speed sensor) connector for Toyota 1JZ / 2JZ engines.

3-pin 2.2 mm sealed automotive connector, grey housing, sold as a wired pigtail (repair harness). The photos show the grey housing from the front (3 square cavities, green seal) and rear (red wire seals, black/red/black wires). Listed as an ignition-coil / instrument-sensor plug.

3-pin 1.5 mm sealed automotive connector for throttle position sensor (TPS), MAP and pressure sensors. Black housing with a purple (magenta) ring seal, grey terminal insert, locking lever, supplied with 3 metal terminals and 3 wire seals.

3-pin 0.6 mm sealed automotive connector, sold as wired pigtails - two black housings with green terminal inserts, red/blue/black wires. Listed as a parking / reversing-sensor connector for Peugeot 307 / 308 / 308CC / 308SW.

3-pin sealed automotive connector housing with an oval mating face, with 3 metal terminals and 3 yellow wire seals. Black plastic housing, waterproof.

3-pin sealed automotive connector housing, sold as a pair with terminals and wire seals. The filed photos show the flat rectangular 3-pin housing with wires (green/red/black). Listed for automobile headlight harnesses.

JWPF series 3-circuit tab/plug housing, 2.0 mm pitch, crimp style. White housing with an orange seal for wire-to-wire and wire-to-board use; mates with the 03R-JWPF-VSLE receptacle housing and uses SWPR-001T-P025 crimp contacts.

JWPF series 3-circuit waterproof receptacle housing, 2.0 mm pitch, crimp style. White housing with a blue interfacial seal for wire-to-wire and wire-to-board use; mates with the 03T-JWPF-VSLE tab/plug housing and uses SWPR-001T-P025 crimp contacts.

Yellow-housing variant of the H4-2A ceramic headlamp bulb socket: a 3-pin ceramic socket for H4 (9003 / HB2) dual-filament headlight bulbs, with a yellow plastic housing, white ceramic insert and a 3-wire pigtail.

3-pin ceramic headlamp bulb socket for H4 (9003 / HB2) dual-filament headlight bulbs - separate circuits for high beam, low beam and ground in one housing. White ceramic insert in an orange or black plastic housing, with a 3-wire pigtail and 7.8 mm terminals.
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.



DT or DTM? Compare DEUTSCH DT and DTM connectors by contact size, current rating, wire gauge, and IP67/IP69K sealing to choose the right sealed connector.