3Pin

H4-2A Y Ceramic H4 Headlamp Bulb Socket Yellow Housing 3-Pin

Yellow-housing variant of the H4-2A ceramic headlamp bulb socket: a 3-pin ceramic socket for H4 (9003 / HB2) dual-filament headlight bulbs, with a yellow plastic housing, white ceramic insert and a 3-wire pigtail. Who Is This Product For? Headlamp bulb socket replacement H4 headlight harness repair Key Selling Points Ceramic bulb socket for H4 / 9003 / HB2 dual-filament bulbs 7.8 mm terminals White ceramic insert, yellow plastic housing 3-wire pigtail Typical Applications H4 headlamp bulbs Headlight harness repair Basic Specifications Positions: 3 Bulb fitment: H4 / 9003 / HB2 (dual-filament: high + low beam) Terminal size: 7.8 mm (by analogy with H4-2A; not separately verified for the Y variant) Body: Ceramic insert + yellow plastic housing Leads: Pre-wired 3-wire pigtail, about 10 cm (from a dimension-labelled seller photo; not independently verified)

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

3Pin

DEUTSCH DT DT06-3S-CE05 3-Way Sealed Connector Plug, Black with Welded End Cap

DEUTSCH DT series 3-position plug housing in black, with enhanced seal retention, reduced-diameter seals and a welded end cap sealing the rear. Houses size 16 socket contacts and mates with the DT04-3P receptacle.

View product

3Pin

DEUTSCH DT DT06-3S-E003 3-Way Sealed Connector Plug, Grey with End Cap

DEUTSCH DT series 3-position plug housing in grey, with an end cap at the rear. Houses size 16 socket contacts and mates with the DT04-3P receptacle; same housing, contacts and ratings as the base DT06-3S.

View product

3Pin

DEUTSCH DT DT06-3S-E008 3-Way Sealed Connector Plug, Grey with Shrink-Boot Adapter

DEUTSCH DT series 3-position plug housing in grey, with a shrink-boot adapter at the rear for fitting a heat-shrink boot over the cable entry. Houses size 16 socket contacts and mates with the DT04-3P-E008 receptacle; the standard 3-pin backbone plug for J1939 CAN networks.

View product