Collection
Auto connectors by pin count, crimp terminals, wiring harnesses, fast connectors, connector accessories, tools and connector kits for automotive, agricultural and industrial equipment. Send an inquiry for specifications, samples and pricing.
DEUTSCH DT series 3-position receptacle housing in grey, with a shrink-boot adapter at the rear for fitting a heat-shrink boot over the cable entry. Houses size 16 male pin contacts and mates with the DT06-3S-E008 plug; the standard 3-pin backbone receptacle for J1939 CAN networks.
3-way sealed automotive connector housing, black PA6-GF15, with a grey locking tab and a pink secondary lock. Cavities numbered 1, 2, 3 on the mating face. Used as a parking-sensor (PDC) / reverse-radar plug. Sold as a pigtail with three wires, or as a kit with terminals and seals. Mating half is 0-2208317-1.
DEUTSCH DT series 3-position receptacle housing in black, with an integrated terminating resistor, J1939 keying and wedgelock included. A J1939 CAN-bus end terminator: it plugs onto the end of a J1939 backbone to terminate the bus. Component-to-wire — the resistor end is sealed and no cable exits the rear.
DEUTSCH DT series 3-position receptacle housing in grey, panel-mount with a welded flange. Houses size 16 male pin contacts and mates with the DT06-3S plug. The flange has 4 mounting holes and mounts the receptacle through a panel cutout.
DEUTSCH DT series 3-position receptacle housing in grey, panel-mount with a welded flange and a shrink-boot adapter at the rear. Houses size 16 male pin contacts and mates with the DT06-3S plug. The flange mounts the receptacle through a panel; the boot adapter accepts a heat-shrink boot to protect the wires.
DEUTSCH DT series 3-position receptacle housing in grey, with an integrated terminating resistor, J1939 keying, gold pins and wedgelock included. A J1939 CAN-bus end terminator, the grey counterpart of the black DT04-3P-EP10.
DEUTSCH DT series 3-position receptacle in grey, a moulded Y-connector with moulded-in gold pins and J1939 keying. One receptacle body with two 3-pin mating shrouds, so two 3-pin plugs can connect into a single 3-pin receptacle — used to split a J1939 backbone stub.
3-way sealed automotive sensor connector, 1.5 mm terminal size. Black housing with a green interfacial seal face, 3 cavities and a locking latch, with terminals. Sold as a throttle-position / TPS sensor connector. Mates with DJ7039Y-1.5-11.
3-pin sealed automotive connector, 3.5 mm terminal size: black housings with an orange interfacial seal, blue or yellow silicone wire seals, and crimp terminals, sold as a mating-pair kit. Mates with DJ7036A-3.5-21.
3-pin automotive connector housing, 6.3 mm terminal size - the mating half of DJ7036-6.3-11. Plastic housings (mating pair) with crimp terminals, sold as a 10-set kit. No photo was found showing the -21 half on its own.
3-pin automotive connector kit, 6.3 mm terminal size: plastic housings (mating pair) with crimp terminals, sold as a 10-set kit. Mates with DJ7036-6.3-21.
3-pin sealed automotive connector housing (JPT style), 3.5 mm terminal size - the mating half of DJ7035Y-3.5-11. Black housing with a metal bail lock on the plug half, blue silicone wire seals and crimp terminals. Sold as a MAP-sensor / EV1 fuel-injector connector. No photo was found showing the -21 half on its own.
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.
DT or DTM? Compare DEUTSCH DT and DTM connectors by contact size, current rating, wire gauge, and IP67/IP69K sealing to choose the right sealed connector.
