3Pin
DEUTSCH DT DT04-3P-EP10 3-Way Sealed Connector Receptacle, Black J1939 Terminator with Resistor
DEUTSCH DT series 3-position receptacle housing in black, with an integrated terminating resistor, J1939 keying and wedgelock included. A J1939 CAN-bus end terminator: it plugs onto the end of a J1939 backbone to terminate the bus. Component-to-wire — the resistor end is sealed and no cable exits the rear.
DEUTSCH DT series 3-position receptacle housing in black, with an integrated terminating resistor, J1939 keying and wedgelock included. A J1939 CAN-bus end terminator: it plugs onto the end of a J1939 backbone to terminate the bus. Component-to-wire — the resistor end is sealed and no cable exits the rear.
Who Is This Product For?
J1939 CAN backbone termination
Commercial-vehicle CAN harness builders
Buyers sourcing the DT04-3P-EP10 terminator receptacle
Key Selling Points
3-position receptacle, size 16 contacts
Black housing, J1939 keyed
Integrated terminating resistor, wedgelock included
13 A, 250 V, IP67 sealed
Typical Applications
J1939 CAN-bus end termination
Commercial-vehicle CAN harnesses
Backbone stub termination
Basic Specifications
Positions: 3
Series: DEUTSCH DT
Housing type: Receptacle (houses male pin contacts)
Contact size: 16 (1.6 mm)
Mating pin diameter: 1.59 mm
Current rating: 13 A
Voltage rating: 250 V
Operating temperature: -55 to +125 °C
Housing material: PA66/PA-GF
Sealing: Silicone seals, IP67
Colour: Black
Modification: Terminating resistor, J1939 key, wedgelock included
Wedgelock: Included
Dimensions: 44.65 x 21.13 x 24.71 mm
Mating part: DT06-3S (J1939-keyed plug)
