Collection
Auto connectors by pin count, crimp terminals, wiring harnesses, fast connectors, connector accessories, tools and connector kits for automotive, agricultural and industrial equipment. Send an inquiry for specifications, samples and pricing.
12-circuit receptacle housing for female terminals, natural white, Mini-Fit Jr. series, 12 cavities in two rows of six, 4.2 mm pitch, with a locking latch on top. The photos show part number 39-01-2120.
12-position right-angle PCB mount header, grey body with a black inner shroud, B keying, for wire-to-board automotive wiring. The shroud is fully shrouded with an orange interface seal, and the 12 pins are in 2 rows of 6 for through-hole solder mounting.
12-position tab housing for male terminals, green, wire-to-wire, 12 terminal slots in two rows of six, 5 mm pitch, 2.8 mm terminal system, with panel-mount latches on the sides.
12-position flange-mount sealed receptacle housing for male terminals, grey, for wire-to-wire automotive wiring. The housing has a 4-hole mounting flange, and the mating face has 12 cavities in two rows of 6, with red wire seals. The green receptacle wedgelock and loose crimp pins are shown beside the housing.
12-position right-angle (90 degree) PCB-mount header, grey, flanged, with Size 16 pins, for wire-to-board automotive wiring. The mating face has 12 pins in 2 rows of 6; the PCB pins exit at a right angle from the rear of the housing. The flange carries an orange seal.
12-position right-angle PCB mount header, grey body with a grey inner shroud, A keying, for wire-to-board automotive wiring. The shroud is fully shrouded with an orange interface seal, and the 12 pins are in 2 rows of 6 for through-hole solder mounting.
12-position receptacle housing for female terminals, yellow, wire-to-wire, 12 cavities in a 3-by-4 grid, 5 mm pitch, 2.8 mm terminal system, PBT GF housing, 28 V, with a locking latch on top.
12-position sealed receptacle housing for male terminals, grey, A keying, with a grey shrink-boot adapter at the rear and enhanced wire seals, for wire-to-wire automotive wiring. The mating face has two slots with cavity numbers 1-12.
12-position DEUTSCH DT series plug housing for female terminals, grey, with the P012 enhanced seal retention modification, for wire-to-wire automotive wiring. The mating face has 12 cavities in two rows of 6, with an orange front seal and side locking latches.
12-position receptacle housing for female terminals, green, wire-to-wire, 12 cavities in a 4-by-3 grid, 5 mm pitch, 2.8 mm terminal system, with a locking latch on top.
12-position sealed receptacle housing for male terminals, black, A keying, with a black end cap and enhanced wire seals, for wire-to-wire automotive wiring. The mating face has 12 cavities in two rows of 6, with red wire seals and cavity numbers 1-12. The green receptacle wedgelock is shown loose beside the housing.
12-position plug housing for female terminals, brown, D keying, for wire-to-wire automotive wiring. The mating face has 12 cavities in 2 rows of 6 behind a red seal, with a locking latch on the housing. Uses the orange plug wedgelock (WM-12S family, sold separately).
Recommended articles
Buying guides, material notes, and stories for choosing with more confidence.
DT or DTM? Compare DEUTSCH DT and DTM connectors by contact size, current rating, wire gauge, and IP67/IP69K sealing to choose the right sealed connector.
