952-main
952-secondary
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

Specifications

Connector type
Self-stripping T-tap IDC, no gel
Colour
Blue
Wire range
18-14 AWG (0.8-2.0 mm²), solid or stranded copper, tinned or untinned
Contact
Tin-plated brass, 0.8 mm thick
Insulator
Flame-retardant nylon
Mating
0.250 x 0.032 in male tab (not included)
Max insulation OD
3.8 mm (0.150 in)
Dimensions
18.5 x 11.2 x 9.7 mm
Rated current by wire size
18 AWG 7.5 A, 16 AWG 10 A, 14 AWG 15 A
Rated voltage
600 V (building wiring), 1000 V (signs and fixtures)
Operating temperature
105 °C (221 °F)
A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.
Who Is This Product For?
  • Automotive wiring installers tapping a branch wire
  • Equipment wiring installers adding a circuit without cutting the main wire
  • Anyone T-tapping 18-14 AWG copper wire
Key Selling Points
  • Self-stripping T-tap IDC, no gel
  • Blue
  • 18-14 AWG (0.8-2.0 mm²)
  • Tin-plated brass contact, 0.8 mm thick
  • Flame-retardant nylon body
  • 0.250 in male-tab receptacle (tab not included)
  • Max insulation OD 3.8 mm
Typical Applications
  • Automotive wiring
  • Equipment wiring
  • Tapping a branch wire off a main wire
Basic Specifications Connector type: Self-stripping T-tap IDC, no gel Colour: Blue Wire range: 18-14 AWG (0.8-2.0 mm²), solid or stranded copper, tinned or untinned Contact: Tin-plated brass, 0.8 mm thick Insulator: Flame-retardant nylon Mating: 0.250 x 0.032 in male tab (not included) Max insulation OD: 3.8 mm (0.150 in) Dimensions: 18.5 x 11.2 x 9.7 mm Rated current by wire size: 18 AWG 7.5 A, 16 AWG 10 A, 14 AWG 15 A Rated voltage: 600 V (building wiring), 1000 V (signs and fixtures) Operating temperature: 105 °C (221 °F)

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

View product
xt60-m-main
Without Gel

XT60-M XT60-Style High-Current Connector, Male

An XT60-style high-current connector, male end: a yellow moulded housing with an open rectangular shroud holding two gold open-cylinder contacts, and a "+" polarity mark on the side. The housing is moulded "XT60" as a type mark. Sold as the male half; it mates with the XT60-F female end.

View product