h1-main
h1-secondary
Without Gel

H1 Quick-Splice Wire Connector, Dual-Channel Straight-Through, 10 A

A transparent H-type dual-channel straight-through quick-splice connector: two wires in, two wires out, no stripping and no soldering — insert the wires and press the black clip, and the copper contacts pierce the insulation. For low-voltage wiring such as LED strips and automotive lighting. Rated current 10 A; voltage is not stated (see notes).

Specifications

Connector type
H-type dual-channel straight-through quick splice, 2-pin, no-strip
Housing
Transparent, black clip
Contact
Copper
Rated current
10 A
Wire range
0.35-0.75 mm²; H1 end 22-20 AWG (0.34-0.50 mm²)
Max cable OD
under 2.1 mm
Dimensions
25.2 x 6.8 x 6.7 mm
Weight
1 g
Operating temperature
-20 to +120 °C
A transparent H-type dual-channel straight-through quick-splice connector: two wires in, two wires out, no stripping and no soldering — insert the wires and press the black clip, and the copper contacts pierce the insulation. For low-voltage wiring such as LED strips and automotive lighting. Rated current 10 A; voltage is not stated (see notes).
Who Is This Product For? • LED strip installers • Automotive lighting modifiers • Anyone straight-splicing two low-voltage wires without stripping
Key Selling Points • H-type dual-channel straight-through, 2-pin • Transparent housing, black clip • Copper contacts • 10 A • 0.35-0.75 mm² wire • Max cable OD under 2.1 mm • No stripping, no soldering
Typical Applications • LED strip wiring • Automotive lighting wiring • Low-voltage harness splicing
Basic Specifications Connector type: H-type dual-channel straight-through quick splice, 2-pin, no-strip Housing: Transparent, black clip Contact: Copper Rated current: 10 A Wire range: 0.35-0.75 mm²; H1 end 22-20 AWG (0.34-0.50 mm²) Max cable OD: under 2.1 mm Dimensions: 25.2 x 6.8 x 6.7 mm Weight: 1 g Operating temperature: -20 to +120 °C

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

952-main
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

View product
951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

View product