ec3-ec5-main
Without Gel

EC3 EC5 Bullet-Type Battery Connectors, 60 A / 120 A

A pair of blue bullet-type RC battery connectors — EC5 (larger, left) and EC3 (smaller, right) side by side: gold-plated copper bullet contacts that push into the housing after soldering, no heat shrink needed. EC3 handles 60 A continuous, EC5 handles 120 A. Both are in this one listing.

Specifications

Connector type
2-pin bullet-type battery connector, male + female pair
Colour
Blue housing
EC3
3.5 mm bullet, 60 A continuous, up to 10 AWG, approx. 25 x 17 x 8 mm
EC5
5 mm bullet, 120 A continuous, up to 10 AWG, approx. 34 x 20 x 10 mm
Contact
Gold-plated copper bullets
Polarity marks
"+" / "-" moulded on the housing
A pair of blue bullet-type RC battery connectors — EC5 (larger, left) and EC3 (smaller, right) side by side: gold-plated copper bullet contacts that push into the housing after soldering, no heat shrink needed. EC3 handles 60 A continuous, EC5 handles 120 A. Both are in this one listing.
Who Is This Product For? • RC hobbyists connecting batteries and speed controllers • RC builders needing high-current bullet connectors • Anyone replacing EC3 or EC5 battery connectors
Key Selling Points • 2-pin bullet-type battery connectors, male + female • Blue housing • EC3: 3.5 mm bullet, 60 A continuous • EC5: 5 mm bullet, 120 A continuous • Gold-plated copper bullets • Polarity marks "+" / "-" moulded on the housing
Typical Applications • RC battery power connections • RC speed-controller wiring • High-current RC power leads
Basic Specifications Connector type: 2-pin bullet-type battery connector, male + female pair Colour: Blue housing EC3: 3.5 mm bullet, 60 A continuous, up to 10 AWG, approx. 25 x 17 x 8 mm EC5: 5 mm bullet, 120 A continuous, up to 10 AWG, approx. 34 x 20 x 10 mm Contact: Gold-plated copper bullets Polarity marks: "+" / "-" moulded on the housing

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

952-main
Without Gel

952 Self-Stripping T-Tap IDC Connector, Blue, 18-14 AWG

A blue self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 18-14 AWG copper wire. The male tab itself is not included.

View product
951-main
Without Gel

951 Self-Stripping T-Tap IDC Connector, Red, 22-18 AWG

A red self-stripping T-tap connector: lay the main wire in the channel, press it closed and the metal blade pierces the insulation — a branch wire is then tapped off through the 0.250-inch male-tab receptacle, without cutting the main wire. For 22-18 AWG copper wire. The male tab itself is not included.

View product
ch-series-main
Without Gel

CH Series Press-Type Spring Wire Connectors, CH1/CH2/CH3, 10 A

A series of white press-type spring wire connectors — CH1 (1-pin), CH2 (2-pin) and CH3 (3-pin): lift the press lever, insert the wire, release and the spring clamps it. No crimping, no tools. For 0.5-2.5 mm² / 22-14 AWG wire. The photo shows CH2 and CH3 groups; CH1 is not pictured.

View product