18Pin
MX23A18SF1 18-Position Socket Housing for Female Contacts, 2.5 mm Pitch
MX23A18SF1 is an 18-position socket housing for crimp socket contacts in the MX23A series, with a 2.5 mm pitch in two rows of nine. Its black glass-filled PBT housing takes female crimp socket contacts for AVSS 0.3-1.25 mm2 wires. The housing is completed by a front cap, rear cover, grommet and seal ring (separate parts) for waterproof construction tested to 100 kPa minimum, for automotive and motorcycle ECU work and general waterproof equipment.
MX23A18SF1 is an 18-position socket housing for crimp socket contacts in the MX23A series, with a 2.5 mm pitch in two rows of nine. Its black glass-filled PBT housing takes female crimp socket contacts for AVSS 0.3-1.25 mm2 wires. The housing is completed by a front cap, rear cover, grommet and seal ring (separate parts) for waterproof construction tested to 100 kPa minimum, for automotive and motorcycle ECU work and general waterproof equipment.
Who Is This Product For?
- Wiring harness builders assembling 18-position MX23A socket connectors for automotive and motorcycle ECU work
- Buyers needing a cable-side socket housing for crimp socket contacts on AVSS 0.3-1.25 mm2 wires
- Repair and replacement buyers matching an 18-position MX23A socket housing
Key Selling Points
- 18 positions in two rows of nine at 2.5 mm pitch, for crimp socket contacts
- Black glass-filled PBT housing; socket contacts, front cap, rear cover, grommet and seal ring are separate parts
- Takes AVSS 0.3-1.25 mm2 wires; socket connector height 22.2 mm maximum
- Waterproof construction with silicone grommet and seal ring, pressure-tested to 100 kPa minimum
Typical Applications
- Automotive ECU wiring
- Motorcycle ECU wiring
- General waterproof equipment with cable-side socket connections
Basic Specifications
Positions: 18 (2 rows of 9)
Pitch: 2.5 mm
Connector type: Socket housing (receptacle housing) for crimp socket contacts
Connector system: Cable/wire side
Contact type: Socket (female) contacts, copper alloy / Sn plating
Housing material: Glass-filled PBT, black
Dimensions: A 20 mm, B 36.6 mm, C 11 mm, D 11.2 mm
Socket connector height: 22.2 mm max.
Dielectric withstanding voltage: AC 1,000 V r.m.s. (1 minute)
Insulation resistance: 100 M ohm min.
Contact resistance: 5 m ohm max. (initial), 10 m ohm max. (post-test)
Operating temperature: -40 to +125 °C
Waterproof test: 100 kPa min. (50 kPa min. post-test)
Applicable wires: AVSS 0.3-1.25 mm2
Socket contacts: M23S05K351, M23S05K4F1 (separate parts)
Dummy pin: M120-55780 (separate part)
Front cap: MX23A18XF1, glass-filled PBT, orange (separate part)
Rear cover: Glass-filled PBT, grey (separate part)
Grommet and seal ring: Silicone rubber, blue (separate parts)
