mx23a18nf1-main
18Pin

MX23A18NF1 18-Position Right-Angle PCB Pin Header, 2.5 mm Pitch, Black

MX23A18NF1 is an 18-position right-angle through-hole PCB pin header in the MX23A series, with a 2.5 mm pitch in two rows of nine. Its black glass-filled PBT shrouded housing carries square tin-plated male pins and a top locking latch, and the mating area uses a seal ring for waterproof construction tested to 100 kPa minimum. It is a board-to-cable header for automotive and motorcycle ECU work and general waterproof equipment.

MX23A18NF1 is an 18-position right-angle through-hole PCB pin header in the MX23A series, with a 2.5 mm pitch in two rows of nine. Its black glass-filled PBT shrouded housing carries square tin-plated male pins and a top locking latch, and the mating area uses a seal ring for waterproof construction tested to 100 kPa minimum. It is a board-to-cable header for automotive and motorcycle ECU work and general waterproof equipment.
Who Is This Product For?
  • Designers and assemblers building automotive and motorcycle ECU boards that need an 18-position right-angle PCB header
  • Buyers wiring board-to-cable connections in waterproof equipment
  • Repair and replacement buyers matching an 18-position MX23A pin header
Key Selling Points
  • 18 positions in two rows of nine at 2.5 mm pitch, with 4.40 mm row spacing
  • Right-angle through-hole mounting with square tin-plated copper-alloy male pins and a 3.10 mm contact post length
  • Black glass-filled PBT shrouded housing with a top locking latch; 18.30 mm insulation height for 1.6 mm PCB
  • Waterproof construction with a seal ring in the mating area, pressure-tested to 100 kPa minimum
Typical Applications
  • Automotive ECU connections
  • Motorcycle ECU connections
  • General waterproof equipment with board-to-cable wiring
Basic Specifications Positions: 18 (2 rows of 9) Pitch: 2.5 mm Row spacing: 4.40 mm Connector type: Pin connector (header), standard type Connector system: Board-to-cable Mounting: Through-hole, right angle Contact type: Male pin, square Contact material: Copper alloy, tin plating Contact post length: 3.10 mm Housing material: Glass-filled PBT, black Insulation height: 18.30 mm Applicable PCB thickness: 1.6 mm Dimensions: A 38 mm, B 24 mm, C 34 mm, D 20 mm, E 31 mm, F 3.1 mm, G 10.1 mm Dielectric withstanding voltage: AC 1,000 V r.m.s. (1 minute) Insulation resistance: 100 M ohm min. Contact resistance: 5 m ohm max. (initial), 10 m ohm max. (post-test) Operating temperature: -40 to +125 °C Waterproof test: 100 kPa min. (50 kPa min. post-test)

Continue browsing

More products from the catalog

Pair it with other pieces from the same collection or routine.

mx23a18sf1-main
18Pin

MX23A18SF1 18-Position Socket Housing for Female Contacts, 2.5 mm Pitch

MX23A18SF1 is an 18-position socket housing for crimp socket contacts in the MX23A series, with a 2.5 mm pitch in two rows of nine. Its black glass-filled PBT housing takes female crimp socket contacts for AVSS 0.3-1.25 mm2 wires. The housing is completed by a front cap, rear cover, grommet and seal ring (separate parts) for waterproof construction tested to 100 kPa minimum, for automotive and motorcycle ECU work and general waterproof equipment.

View product