With Gel
UG Gel-Filled IDC Bridge Tap Connector, Green Cap, 19-26 AWG
A gel-filled IDC bridge (tap) connector with a green cap and clear body: it taps a branch wire onto a through line of the same polarity — it is a tap, not a butt splice. The contacts pierce the insulation when pressed, gel-sealed against moisture. For 19-26 AWG solid copper wire.
Specifications
- Connector type
- Gel-filled IDC bridge (tap) connector, 2-wire
- Wire range
- 19-26 AWG solid copper, 0.4-0.9 mm conductor
- Max insulation OD
- 1.67 mm (0.066 in)
- Colour
- Green cap, clear body
- Filling
- Gel
A gel-filled IDC bridge (tap) connector with a green cap and clear body: it taps a branch wire onto a through line of the same polarity — it is a tap, not a butt splice. The contacts pierce the insulation when pressed, gel-sealed against moisture. For 19-26 AWG solid copper wire.
Who Is This Product For?
- Telecom installers tapping a branch wire
- Building wiring installers adding a drop to a through line
- Anyone bridging 19-26 AWG solid copper wire
Key Selling Points
- Gel-filled IDC bridge (tap) connector, 2-wire
- Green cap, clear body
- 19-26 AWG solid copper (0.4-0.9 mm)
- Max insulation OD 1.67 mm
- Tap, not a butt splice
- No stripping needed
- Gel moisture seal
Typical Applications
- Voice and data cabling
- Branch taps on through lines
- Building wiring
Basic Specifications
Connector type: Gel-filled IDC bridge (tap) connector, 2-wire
Wire range: 19-26 AWG solid copper, 0.4-0.9 mm conductor
Max insulation OD: 1.67 mm (0.066 in)
Colour: Green cap, clear body
Filling: Gel
