12Pin
DTM15-12PA 12-Position DEUTSCH DTM Vertical PCB Header, Grey, A Keying
12-position vertical PCB mount header, grey body with a grey sleeve retainer, A keying, for wire-to-board automotive wiring. The shroud is fully shrouded with an orange interface seal, and the 12 pins are in 2 rows of 6 for through-hole solder mounting. The letter A is moulded on the grey sleeve retainer. Mates with the DTM06-12S plug.
Specifications
- Positions
- 12 (2 rows of 6)
- Series
- DEUTSCH DTM
- Connector type
- PCB mount header, vertical
- Connector system
- Wire-to-board
- Centreline (pitch)
- 4.19 mm
- Contact size
- Size 20
- Colour
- Grey body, grey sleeve retainer (A keying)
- Keying code
- A
- Contact plating
- Nickel on the mating side, tin on the PCB side
- Termination to PCB
- Through hole - solder
- Housing material
- PA46 GF30
- Sealing
- Not tested
- Mating part
- DTM06-12S
12-position vertical PCB mount header, grey body with a grey sleeve retainer, A keying, for wire-to-board automotive wiring. The shroud is fully shrouded with an orange interface seal, and the 12 pins are in 2 rows of 6 for through-hole solder mounting. The letter A is moulded on the grey sleeve retainer. Mates with the DTM06-12S plug.
Who Is This Product For?
- Electronics and harness builders needing a 12-way vertical PCB header
- Buyers sourcing the DTM15-12PA header
- Replacement of DTM15-12PA vertical headers
Key Selling Points
- 12-position vertical PCB header, grey body, grey sleeve retainer, A keying
- 12 pins in 2 rows of 6, through-hole solder mounting
- Size 20 contacts, 4.19 mm pitch, PA46 GF30 housing
- Sealing: Not tested - never claim an IP rating
- Mates with the DTM06-12S plug
Typical Applications
- PCB-mount wire-to-board connections
- Automotive control-module and sensor wiring
- 12-circuit vertical header connections
Basic Specifications
- Positions: 12 (2 rows of 6)
- Series: DEUTSCH DTM
- Connector type: PCB mount header, vertical
- Connector system: Wire-to-board
- Centreline (pitch): 4.19 mm
- Contact size: Size 20
- Colour: Grey body, grey sleeve retainer (A keying)
- Keying code: A
- Contact plating: Nickel on the mating side, tin on the PCB side
- Termination to PCB: Through hole - solder
- Housing material: PA46 GF30
- Sealing: Not tested
- Mating part: DTM06-12S
