60Pin
6437288-5 60-Position Right-Angle PCB Pin Header, 3 mm Pitch, Black, Keying Code 1
A 60-position PCB mount pin header in black, right-angle (horizontal), through-hole solder, at 3 mm pitch in 4 rows, fully shrouded with a mounting flange and locking ramp. Gold-plated 1 mm male pins with tin solder tails, brass contacts, polyester insulation, rated 250 VAC and -40 to +125 °C. Dual-port structure: a 34-position port plus a 26-position port, keying code 1, Lower variant.
A 60-position PCB mount pin header in black, right-angle (horizontal), through-hole solder, at 3 mm pitch in 4 rows, fully shrouded with a mounting flange and locking ramp. Gold-plated 1 mm male pins with tin solder tails, brass contacts, polyester insulation, rated 250 VAC and -40 to +125 °C. Dual-port structure: a 34-position port plus a 26-position port, keying code 1, Lower variant.
Who Is This Product For?
- Automotive harness and ECU / control-module builders who need a sealable 60-position right-angle PCB header in black, keying code 1, Lower variant
- Buyers wiring a PCB to two mating plug housings (34-position and 26-position) in an engine-bay or chassis harness
Key Selling Points
- 60 positions in 4 rows at 3.00 mm pitch; dual-port structure, 34-position port + 26-position port
- Right-angle (horizontal) PCB pin header, fully shrouded (4-wall), through-hole solder
- Gold-plated 1 mm male pins, brass contacts; tin solder tails; polyester insulation
- 250 VAC; -40 to +125 °C; UL 94V-0; tube packaging
- Keying code 1, Lower variant; mounting flange and locking ramp; black
- Sealable: Yes; no IP rating claimed; rated current unverified (product specification 108-78140 not obtained)
Typical Applications
- Automotive wiring harnesses
- ECU and control-module connections
- Wire-to-board power and signal connections
- In-vehicle electrical connections
Basic Specifications
Number of positions: 60
Number of positions loaded: All
Number of signal positions: 60
Number of rows: 4
Connector type: PCB mount header, right angle (horizontal), wire-to-board, fully shrouded (4-wall)
Contact type: Male pin, round; mating pin diameter 1 mm
Contact material: Brass
Contact mating-area plating: Gold over Ni
Contact post plating: Tin
Insulation material: Polyester
Housing material: PBT/PET (catalogue technical characteristics, header family value)
Colour: Black
Keying code: 1
Variant: Lower (catalogue)
Ports: 2 (34-position port + 26-position port)
Termination: Through hole - solder
Contact post length: 4.00 mm
Sealable: Yes
Operating voltage: 250 VAC
Operating temperature range: -40 to +125 °C
Insulation height: 27.40 mm
Connector width: 45.5 mm; depth 36.5 mm; height 27.9 mm
Mounting features: Mounting flange; locking ramp
Packaging method: Tube
UL flammability rating: UL 94V-0
Shielded: No
