Crimp Terminals
0462-201-2031 Size 20 Solid Gold Crimp Socket Contact, 20 AWG, 7.5 A
A solid machined size 20 socket contact with gold plating for DTM series housings. Closed-entry mating end with a protected forked contact, inspection hole and a wire-entry chamfer on the crimp barrel. Rated 7.5 A maximum at 125 °C continuous for 20 AWG wire.
A solid machined size 20 socket contact with gold plating for DTM series housings. Closed-entry mating end with a protected forked contact, inspection hole and a wire-entry chamfer on the crimp barrel. Rated 7.5 A maximum at 125 °C continuous for 20 AWG wire.
Who Is This Product For?
- Harness builders fitting DTM series sealed connectors
- Repair shops replacing a damaged size 20 socket
- Anyone crimping 20 AWG wire into a DTM housing
Key Selling Points
- Solid machined socket, not stamped
- Gold plating
- 20 AWG (0.50 mm²)
- 1 mm mating pin diameter
- 7.5 A maximum at 125 °C continuous
- 100 mating cycles
- Inspection hole in the crimp barrel
Typical Applications
- DTM series sealed connector housings
- Automotive wiring harnesses
- Sensor and signal wiring
Basic Specifications
- Contact type: Solid socket (machined), size 20
- Wire range: 20 AWG (0.50 mm²)
- Plating: Gold
- Rated current (max, 125 °C continuous): 7.5 A
- Mating cycles: 100
- Recommended strip length: 0.156-0.218 in (3.96-5.54 mm)
- Minimum contact retention force: 20 lbs (89 N)
- Crimp tensile reference: 20 lbs (89 N)
- Mating pin diameter: 1 mm
- Contact material: Copper alloy
