Crimp Terminals
0460-202-20141 Size 20 Solid Nickel Crimp Pin Contact, 20 AWG, 7.5 A
A solid machined size 20 pin contact with nickel plating for DTM series housings. Smaller and finer than the size 16 pin, it suits 20 AWG wire. The hollow crimp barrel has an inspection hole and a retention shoulder. Rated 7.5 A.
Specifications
- Contact type
- Solid pin (machined), size 20
- Plating
- Nickel
- Wire range
- 20 AWG (0.5 mm²)
- Mating pin diameter
- 1 mm (same drawing as the gold size 20 model)
- Rated current (typical)
- 7.5 A (same drawing as the gold size 20 model)
- Operating temperature
- -55 to +125 °C (nickel-plated contact family value; not stated on this model's drawing)
- Termination
- Crimp, hollow barrel with inspection hole
A solid machined size 20 pin contact with nickel plating for DTM series housings. Smaller and finer than the size 16 pin, it suits 20 AWG wire. The hollow crimp barrel has an inspection hole and a retention shoulder. Rated 7.5 A.
Who Is This Product For?
- Harness builders fitting DTM series sealed connectors
- Repair shops replacing a damaged size 20 pin
- Anyone crimping 20 AWG wire into a DTM housing
Key Selling Points
- Solid machined pin, not stamped
- Nickel plating
- 20 AWG (0.5 mm²)
- 1 mm mating pin diameter
- 7.5 A typical rating
- Inspection hole in the crimp barrel
Typical Applications
- DTM series sealed connector housings
- Automotive wiring harnesses
- Sensor and signal wiring
Basic Specifications
- Contact type: Solid pin (machined), size 20
- Plating: Nickel
- Wire range: 20 AWG (0.5 mm²)
- Mating pin diameter: 1 mm (same drawing as the gold size 20 model)
- Rated current (typical): 7.5 A (same drawing as the gold size 20 model)
- Operating temperature: -55 to +125 °C (nickel-plated contact family value; not stated on this model's drawing)
- Termination: Crimp, hollow barrel with inspection hole
