Crimp Terminals
0460-202-1631 Size 16 Solid Gold Crimp Pin Contact, 16-20 AWG, 13 A
A solid machined size 16 pin contact with gold plating for DT series housings. The hollow crimp barrel has an inspection hole to confirm the wire is fully seated and a retention shoulder that locks the contact in the housing. Rated 13 A for 16-20 AWG wire.
Specifications
- Contact type
- Solid pin (machined), size 16
- Plating
- Gold
- Wire range
- 16-20 AWG (0.5-1.5 mm²)
- Mating pin diameter
- 1.59 mm
- Rated current (typical)
- 13 A
- Terminal transmits
- 0-24 A (low power)
- Operating temperature
- -55 to +150 °C (gold-plated contact family value; not stated in this model's own datasheet)
- Contact material
- Copper alloy
- Termination
- Crimp, hollow barrel with inspection hole
A solid machined size 16 pin contact with gold plating for DT series housings. The hollow crimp barrel has an inspection hole to confirm the wire is fully seated and a retention shoulder that locks the contact in the housing. Rated 13 A for 16-20 AWG wire.
Who Is This Product For?
- Harness builders fitting DT series sealed connectors
- Repair shops replacing a damaged size 16 pin
- Anyone crimping 16-20 AWG wire into a DT housing
Key Selling Points
- Solid machined pin, not stamped
- Gold plating
- 16-20 AWG (0.5-1.5 mm²)
- 1.59 mm mating pin diameter
- 13 A typical rating
- Inspection hole in the crimp barrel
- Retention shoulder
Typical Applications
- DT series sealed connector housings
- Automotive wiring harnesses
- Agricultural and industrial equipment wiring
Basic Specifications
- Contact type: Solid pin (machined), size 16
- Plating: Gold
- Wire range: 16-20 AWG (0.5-1.5 mm²)
- Mating pin diameter: 1.59 mm
- Rated current (typical): 13 A
- Terminal transmits: 0-24 A (low power)
- Operating temperature: -55 to +150 °C (gold-plated contact family value; not stated in this model's own datasheet)
- Contact material: Copper alloy
- Termination: Crimp, hollow barrel with inspection hole
